ProFoil touch foil · by SSI

Turn any window into a touch screen.

ProFoil is a near-invisible film that goes on the inside of glass or acrylic. Put a screen or projection behind it, plug in one USB cable, and people can tap, swipe and pinch right through the glass.

  • Up to 40+ touch points
  • 2″ to 4.5 m
  • Through 12 mm glass
  • Single USB
Two people using an interactive touch screen through a storefront window Storefront window · touch foil behind glass

How it works

Everything stays safely behind the glass.

A ProFoil film carries a fine grid of sensing wires about as thick as a sheet of cardstock. Stuck to the inside of a window or acrylic panel, it feels a fingertip on the other side. The controller board and USB cable are included, and the touch works like any touch screen on the computer.

  • Works on glass, acrylic and other non-conductive surfaces
  • Pair it with an LCD, LED, high-bright monitor or rear-projection film
  • Powered by the USB cable; no separate power supply
  • Nothing for passers-by to damage: the glass is the touch surface
See how it works
01
Your glass or acrylicThe surface people touch, from the outside
02
ProFoil touch foilApplied to the inside face of the glass
03
Screen or projectionLCD, LED, high-bright monitor or rear-projection film
04
Controller + one USB cableTo a Windows, Android or Linux computer (Mac on Pro Touch 40)

Installation

Four steps, no special tools.

Touch foil goes on wet, like window film. Each foil is a one-time install, so test it before it goes on the glass.

  1. Clean the glass

    Wash the inside face with clean water. Any dust left behind shows as a bubble.

  2. Line it up

    Peel the liner while spraying water, and match the marked touch area to the screen edges.

  3. Squeegee out

    Work water and bubbles out from the centre to the edges. You can nudge it for a few minutes.

  4. Let it dry, plug in

    Wait 24–48 hours for it to dry fully, then connect the controller by USB and calibrate.

Why ProFoil

Built for real windows, not a lab.

3-year foil warranty

Three years on the foil and one year on the controller.

Made to size

Standard sizes from 10.1″, custom cuts up to 1.4 × 4.5 m, and round foils for tables.

CE and RoHS compliant

A clear, low-profile film with light transmission of 85–89% or more, depending on model.

Tell us about your glass.

Send the glass size and thickness and what will sit behind it. We will recommend a foil and quote it.